Buy Low Price From Here Now
Drills two pocket holes in one machine cycle. 3/4", 1" and 1-3/4" on-center spacings. Fast, 1 second cycle time. Quiet and powerful. The H6828 is the only pocket hole machine on the market that has the ability to drill two pocket holes in one machine cycle across rails of varying widths. Drill spindles in the machine are fixed at 3/4", 1" and 1-3/4" on center allowing it to drill today's most common rail widths of 1-1/2" up to 3-3/4" in one machine cycle. Three step drill bits are utilized in the machine, one of which is left-handed. Approximate shipping weight: 224 lbs.
Readmore
Technical Details
- Three spindle design- Fixed spacings of 3/4", 1" and 1-3/4"
- Electric, 1-1/2 hp motor
- 110V single phase 90 psi for hold down
- Includes 2 DKDB and 1-LH-DKDB 3/8" cobalt step bit
See more technical details
By Bill Gamble (Headland, Al USA)
I purchased the kreg dk3100 3 spindle pocket machine and installed it in my shop recently. I called tech support because the manual stated the machine required 120 psi to operate properly however I was told that only 90 psi was sufficient. After completing the installation I found the machine did exactly as I had hoped. It has already saved time in the shop as we're punching twice the holes in half the time. Worth every cent.
The next time I need to purchase a machine for the shop I will be sure to check out amazon.com before making the purchase.
Images Product
Buy Kreg DK3100 1-1/2 Horsepower Floor Electric Fully-Automatic 3-Spindle Pocket Machine Now
No comments:
Post a Comment