Buy Low Price From Here Now
Readmore
Technical Details
- 3/8-Inch chuck, 10-mm, 3/8 by 24 thread- Drills perpendicular to surface, oblique angles and round rods
- Positive stop for accurate drill depth control
- Dual locking knobs for holding precise angle setting
- Lock pins hold tool firmly on flat surfaces and center the tool for drilling
See more technical details
By handybern (Baltimore, MD, USA)
Using 4 screws to secure the guide to a wooden base, clamping the base to my worktable, I drilled a hole w/ a sharp 1" forstner bit. I put a 1" dowel into the hole; it was loose and crooked. I've done this before freehand, and know that when the hole's cut that way, the dowel is snug. When I examined the guide more closely, I noticed that the shaft on which the chuck is attached wiggles; no way to tighten it. That's why the hole is too large, and why it is not perpendicular to the base.The guide does not "bring drill press accuracy" nor does it "drill accurate right angled holes"; it is not a "precision" guide as the website describes it.
Images Product
Buy Promax 79251 Precision Drill Guide Tool for Portable and Electric Drills Now
No comments:
Post a Comment